FAQ Klyna

Step 1:
Turn off your robot vacuum and press the release button to remove the water tank.

Step 2:
Remove the wipe.

Step 3:
Remove the filter from the water tank and pour out the unused water.

Step 1:
Turn off the robot.

Step 2:
Press the release button to remove the dust bin from the robot.

Step 3:
Open the dust container cover and empty the accumulated dirt.

Step 4:
Use the tabs on the filter to pull it out of the dust container.

Step 5:
Knock the filter over a trash can or remove the dust with a brush.

Step 6:
Wash the filter and the dust container lid with water.

Step 7:
Allow the filters to air dry completely before using again.

Step 1:
Turn off the robot.

Step 2:
Turn the robot vacuum upside down and find the sensors.

Step 3:
Only clean the sensors with a dry cloth. DO NOT use liquids to clean the sensors.

Step 1:
Turn off the robot.

Step 2:
Turn your robot over, push up the tabs on the main brush flap and lift the flap off.

Step 3:
Remove the main brush from the robot.

Step 4:
Use the included knife or scissors to cut any threads or hair that are wrapped around the main brushes.

Step 5:
Clean the inside of the brush with a cloth.

Step 1:
Turn off the robot.

Step 2:
Pull the side brush off the drive shaft.

Step 3:
Carefully unwind any hair and threads that are wrapped around the side brush.

Step 4:
Wipe dirt and dust from the side brushes with a warm damp cloth and carefully restore the shape of the side brushes if they are bent.

Step 5:
To reattach the side brush, align the center of the side brush with the mounting point and press the side brush onto the drive shaft.

Step 1:
Turn off the robot.

Step 2:
Press the wheels down and remove any dirt with the brush provided.